How to Read UN Packaging Codes

The basis of all national and international regulations for the safe transport of dangerous goods are the Recommendations ("Specification") of the "UN Committee of Experts" as published in "The Orange Book".


There are five different (relevant) Modal Authorities who each publish their own regulation manuals in which they follow "The Orange Book".

These are the:
The Technical Instructions for the Safe Transport of Dangerous Goods by Air published by the International Civil Aviation Authority (ICAO).


The International Maritime Dangerous Goods Code (IMDG) published by the International Maritime Organisation (IMO).


The European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR) published by The United Nations Economic Commission for Europe (UNECE).


The International Agreement for the Carriage of Dangerous Goods by Rail (RID) published by The Intergovermental Organisation for International Carriage by Rail (OTIF).


The Hazardous Materials Regulations (Title 49 CFR Parts 100-185) published by The Office of Hazardous Materials Safety, US DOT.


What are Dangerous Goods?

Goods which are classified as dangerous for transport range from those which are highly dangerous (such as explosives and fuming acids) to everyday products such as paints, solvents and pesticides found in the home and at work. Dangerous goods, which can also be called "Hazardous Materials" (mainly in the US), may be substances or products. The transport of such goods is regulated to ensure the safety of life, of the ship, aircraft or vehicle, and of other goods (such as foodstuffs) being transported. For example, solvents must be in sealed airtight containers otherwise the fumes could affect people in the close vicinity. Other substances may not be harmful unless they come into contact with fire or water, but for safety purposes these are also classified as dangerous goods.

When transporting "Hazardous Materials", in most cases, the packaging has to be certified to UN standards. The international agreements for the carriage of dangerous goods require packaging to be of a design-type certified by a national competent authority. This involves testing the packaging against the appropriate UN specification to ensure its suitability for the carriage of certain dangerous goods. Such packaging is often referred to as "type-approved", "UN Approved" or "UN certified" and marked in a particular way, prefixed by the UN logo and followed by codes.

The UN Marking System

The U.N. marking system indicates several characteristics of the packaging, as well as information on the test levels the packaging has successfully passed. Because these test levels are related to the hazard level and physical and chemical characteristics of the substance to be filled, the markings also indicate some of the properties of the materials that may be packed in each container.

A sample UN Marking:
1H2 / Y1.8 / 100 / 08 / F / OA30900


UN The United Nations Coding System


1
Type of Container
1. Drums/Pails
2. Barrels
3. Jerricans
4. Boxes
5. Bags
6. Composite Packagings


H
Material of Construction
A. Steel
B. Aluminum
C. Wood
D. Fibre
E. Plastic


2
Category Within Type
1. Closedhead
2. Openhead


Y
Packaging Group for which container was tested
X. for Packaging Group I, II, III
Y. for Packaging Group II and III
Z. for Packaging Group III
Packaging Group I: Great Danger - high hazard levelPackaging Group II: Medium Danger - medium hazard levelPackaging Group III: Minor Danger - low hazard level


1.8
Density or specific gravity of material packedORFor packaging intended for Solids (powders, pills, capsules, tablets) or that have inner packaging, this marking will indicate the maximum gross mass (weight) in kilograms.


100
Hydraulic pressure in kilo-pascal (kPa)ORFor packaging intended for Solids or that have inner packaging, an "S" in upper case will follow the gross mass.


08
Current year


F
Country where container was manufactured


OA30900
Code for manufacturing plant

0 comments:

Powered by Blogger.