Isotopes | High Resolution Mass Spectrometry

No comments:

Isotopes

Since a mass spectrometer separates and detects ions of slightly different masses, it easily distinguishes different isotopes of a given element. This is manifested most dramatically for compounds containing bromine and chlorine, as illustrated by the following examples. Since molecules of bromine have only two atoms, the spectrum on the left will come as a surprise if a single atomic mass of 80 amu is assumed for Br. The five peaks in this spectrum demonstrate clearly that natural bromine consists of a nearly 50:50 mixture of isotopes having atomic masses of 79 and 81 amu respectively. Thus, the bromine molecule may be composed of two 79Br atoms (mass 158 amu), two 81Br atoms (mass 162 amu) or the more probable combina3. tion of 79Br-81Br (mass 160 amu). Fragmentation of Br2 to a bromine cation then gives rise to equal sized ion peaks at 79 and 81 amu.

The presence of chlorine or bromine in a molecule or ion is easily detected by noticing the intensity ratios of ions differing by 2 amu. In the case of methylene chloride, the molecular ion consists of three peaks at m/z=84, 86 & 88 amu, and their diminishing intensities may be calculated from the natural abundances given above. Loss of a chlorine atom gives two isotopic fragment ions at m/z=49 & 51amu, clearly incorporating a single chlorine atom. Fluorine and iodine, by contrast, are monoisotopic, having masses of 19 amu and 127 amu respectively. It should be noted that the presence of halogen atoms in a molecule or fragment ion does not change the odd-even mass rules given above.

Two other common elements having useful isotope signatures are carbon, 13C is 1.1% natural abundance, and sulfur, 33S and 34S are 0.76% and 4.22% natural abundance respectively. For example, the small m/z=99 amu peak in the spectrum of 4-methyl-3-pentene-2-one (above) is due to the presence of a single 13C atom in the molecular ion. Although less important in this respect, 15N and 18O also make small contributions to higher mass satellites of molecular ions incorporating these elements.

Fragmentation Patterns

The fragmentation of molecular ions into an assortment of fragment ions is a mixed blessing. The nature of the fragments often provides a clue to the molecular structure, but if the molecular ion has a lifetime of less than a few microseconds it will not survive long enough to be observed. Without a molecular ion peak as a reference, the difficulty of interpreting a mass spectrum increases markedly. Fortunately, most organic compounds give mass spectra that include a molecular ion, and those that do not often respond successfully to the use of milder ionization conditions. Among simple organic compounds, the most stable molecular ions are those from aromatic rings, other conjugated pi-electron systems and cycloalkanes. Alcohols, ethers and highly branched alkanes generally show the greatest tendency toward fragmentation.
The mass spectrum of dodecane illustrates the behavior of an unbranched alkane. Since there are no heteroatoms in this molecule, there are no non-bonding valence shell electrons. Consequently, the radical cation character of the molecular ion (m/z = 170) is delocalized over all the covalent bonds. Fragmentation of C-C bonds occurs because they are usually weaker than C-H bonds, and this produces a mixture of alkyl radicals and alkyl carbocations. The positive charge commonly resides on the smaller fragment, so we see a homologous series of hexyl (m/z = 85), pentyl (m/z = 71), butyl (m/z = 57), propyl (m/z = 43), ethyl (m/z = 29) and methyl (m/z = 15) cations. These are accompanied by a set of corresponding alkenyl carbocations (e.g. m/z = 55, 41 &27) formed by loss of 2 H. All of the significant fragment ions in this spectrum are even-electron ions. In most alkane spectra the propyl and butyl ions are the most abundant.
The presence of a functional group, particularly one having a heteroatom Y with non-bonding valence electrons (Y = N, O, S, X etc.), can dramatically alter the fragmentation pattern of a compound. This influence is thought to occur because of a "localization" of the radical cation component of the molecular ion on the heteroatom. After all, it is easier to remove (ionize) a non-bonding electron than one that is part of a covalent bond. By localizing the reactive moiety, certain fragmentation processes will be favored. These are summarized in the following diagram, where the green shaded box at the top displays examples of such "localized" molecular ions. The first two fragmentation paths lead to even-electron ions, and the elimination (path #3) gives an odd-electron ion. Note the use of different curved arrows to show single electron shifts compared with electron pair shifts.

Mass Spectrometry
The charge distributions shown above are common, but for each cleavage process the charge may sometimes be carried by the other (neutral) species, and both fragment ions are observed. Of the three cleavage reactions described here, the alpha-cleavage is generally favored for nitrogen, oxygen and sulfur compounds. Indeed, in the previously displayed spectra of 4-methyl-3-pentene-2-one and N,N-diethylmethylamine the major fragment ions come from alpha-cleavages

The complexity of fragmentation patterns has led to mass spectra being used as "fingerprints" for identifying compounds. Environmental pollutants, pesticide residues on food, and controlled substance identification are but a few examples of this application. Extremely small samples of an unknown substance (a microgram or less) are sufficient for such analysis.
The following mass spectrum of cocaine demonstrates how a forensic laboratory might determine the nature of an unknown street drug.
Even though extensive fragmentation has occurred, many of the more abundant ions (identified by magenta numbers) can be rationalized by the three mechanisms shown above. The m/z = 42 ion might be any or all of the following: C3H6, C2H2O or C2H4N. A precise assignment could be made from a high-resolution m/z value (next section).Odd-electron fragment ions are often formed by characteristic rearrangements in which stable neutral fragments are lost. Mechanisms for some of these rearrangements have been identified by following the course of isotopically labeled molecular ions.

5. High Resolution Mass Spectrometry

Formula C6H12 C5H8O C4H8N2

Mass 84.0939 84.0575 84.0688

In assigning mass values to atoms and molecules, we have assumed integral values for isotopic masses. However, accurate measurements show that this is not strictly true. Because the strong nuclear forces that bind the components of an atomic nucleus together vary, the actual mass of a given isotope deviates from its nominal integer by a small but characteristic amount (remember E = mc2). Thus, relative to 12C at 12.0000, the isotopic mass of 16O is 15.9949 amu (not 16) and 14N is 14.0031 amu (not 14). By designing mass spectrometers that can determine m/z values accurately to four decimal places, it is possible to distinguish different formulas having the same nominal mass. The table on the right illustrates this important feature, and a double-focusing high-resolution mass spectrometer easily distinguishes ions having these compositions. Mass spectrometry therefore not only provides a specific molecular mass value, but it may also establish the molecular formula of an unknown compound.

HOW TO CLEAN pH ELECTRODES | HOW TO REJUVENATE pH ELECTRODES

No comments:

HOW TO CLEAN pH ELECTRODES

Cleaning of the electrode (note that in case of gel electrodes replacing of the reference solution is usually impossible):

General
Soak in 0.1M HCl for half an hour.
Drain and refill the reference solution.
Soak the electrode in filling solution for one hour.

Inorganic:
Soak in 0.1M tetrasodium EDTA solution for 15 minutes.
Drain and refill the reference solution.
Soak the electrode in filling solution for one hour.

Protein:
Soak in 1% pepsin / 0.1M HCl for 15 minutes.
Drain and refill the reference solution.
Soak the electrode in filling solution for one hour.

Grease and Oil:
Rinse with detergent or ethanol solution.
Drain and refill the reference solution.
Soak the electrode in filling solution for one hour. Electrode response may be enhanced by substituting a mixture of 1:1 pH 4 buffer and filling solution for the soaking solution.

Cleaning of the clogged junction:
Pollution by sulfides:
Use a solution of 8% thiocarbamide in 1 mol/L HCl.
Keep the electrode in the above solution till junction's color turns pale.
Pollution by silver chloride:
Use concentrated ammonia solution.
Keep the electrode in the above solution for about 12 hours.
Rinse and put into pH 4 buffer for at least 1 hour.
Other contamination have to be removed by cleaning with distilled water, alcohol or mixtures of acids. If nothing else helps you may consider use of ultrasonic cleaner as last resort.



HOW TO REJUVENATE pH ELECTRODES

Note: following procedures are a last resort. They may work, they may won't. You may try them before throwing electrode away.

First of all - clean the electrode as described in electrode cleaning section, then:

Soak the electrode for 4-8 hours in 1M HCl solution.

Rinse it and move to pH 7 buffer for an hour.

Give it a try.

If the electrode is still not working:
Fill the electrode with filling solution.
Move to the fume hood!
Place the electrode in the 10% nitric acid solution on a hotplate. Heat to boiling, and keep it in the solution for 10 minutes.
Place 50 mL of filling solution in a second clean beaker. Heat, although boiling is not necessary.
While the electrode is still hot, transfer it to the beaker of heated filling solution. Set aside to cool. When the electrode has cooled, test the electrode as described in the testing electrode parameters section. This rejuvenating procedure is particularly effective with gel filled combination electrodes. Do not be concerned if a small amount of the gel protrudes through the reference frit during the boiling in nitric acid step. This is both acceptable and useful.

If this procedure does not result in a pH electrode that responds quickly and has a slope of 55 - 61 mV/pH unit, the electrode is unrecoverable and should be thrown away. Remember, the procedure was proposed for the electrode that was to be thrown away anyway.
Some manufacturers suggest the electrode may be reactivated by treating with a diluted solution of hydrofluoric acid followed by subsequent conditioning in electrolyte. Before considering the procedure, take into account that hydrofluoric acid is extremally dangerous! Safer (but still dangerous) approach can be to use some slightly acidic solution containing fluorides, like 20 wt% ammonium bifluoride, NH4HF2 - put glass bulb part of the electrode in the solution for a minute followed by 15 seconds bath in 6 M hydrochloric acid. Rinse the electrode well and soak for 24 hours in a pH buffer with pH .
























































Bond Stretching

No comments:

Energy due to Bond Stretching Whenever a bond is compressed or stretched the the energy goes up.

The energy potential for bond stretching and compressing is described by an equation similar to Hooke's law for a spring, except a cubic term is added.

This cubic term helps to keep the energy from rising too sharply as the bond is stretched.

Powered by Blogger.